TEL
+ 86 571 8186 2065
COLD SAW BLADE FOR LOW AND MIDDLE CARBON STEEL
With higher wear and adhesion resistant tooth tips, it achieves more stable and longer sawing performance for billets with carbon content less than 0.45% and other alloy steels.
| Size | Pin holes | ||||
|---|---|---|---|---|---|
| D | B | b | d | z | |
| 240 | 1.75 | 1.50 | 32 | 60 | 2/10.8/63 |
| 250 | 2.0 | 1.70 | 32 | 54 | 4/11/63 |
| 250 | 2.0 | 1.70 | 32 | 54 | 4/9/50 |
| 250 | 2.0 | 1.70 | 32 | 72 | 4/11/63 |
| 250 | 2.0 | 1.70 | 32 | 72 | 4/9/50 |
| 250 | 2.0 | 1.70 | 32 | 80 | 4/9/50 |
| 250 | 2.0 | 1.75 | 32 | 54 | 4/9/50 |
| 250 | 2.1 | 1.75 | 40 | 80 | 4/11/63 |
| 280 | 2.0 | 1.75 | 32 | 60 | 4/11/63 |
| 280 | 2.0 | 1.75 | 32 | 80 | 4/11/63 |
| 285 | 2.0 | 1.70 | 32 | 60 | 4/11/63 |
| 285 | 2.0 | 1.70 | 32 | 60 | 4/9/50 |
| 285 | 2.0 | 1.70 | 32 | 80 | 4/11/63 |
| 285 | 2.0 | 1.70 | 32 | 80 | 4/9/50 |
| 285 | 2.0 | 1.75 | 40 | 60 | 2/10.8/80 |
| 315 | 2.3 | 2.0 | 40 | 80 | 4/11/63 |
| 360 | 2.5 | 2.25 | 40 | 80 | 4/10.8/90 |
| 360 | 2.5 | 2.25 | 50 | 80 | 4/16/80 |
| 360 | 2.5 | 2.25 | 50 | 100 | 4/16/80 |
| 360 | 2.5 | 2.25 | 40 | 100 | |
| 360 | 2.6 | 2.25 | 40 | 60 | 4/10.8/90 |
| 360 | 2.6 | 2.25 | 50 | 60 | 4/14/80 |
| 360 | 2.6 | 2.25 | 50 | 60 | 4/16/80 |
| 360 | 2.6 | 2.25 | 40 | 80 | 4/10.8/90 |
| 360 | 2.6 | 2.25 | 40 | 100 | 4/14/80 |
| 380 | 2.5 | 2.25 | 50 | 48 | 4/16/80 |
| 380 | 2.5 | 2.25 | 50 | 80 | 4/16/80 |
| 425 | 2.7 | 2.25 | 50 | 50 | 4/16/80 |
| 425 | 2.7 | 2.25 | 50 | 60 | 4/16/80 |
| 460 | 2.7 | 2.25 | 50 | 40 | 4/10.8/90 |
| 460 | 2.7 | 2.25 | 50 | 40 | 4/21/90 |
| 460 | 2.7 | 2.25 | 50 | 60 | 4/10.8/90 |
| 460 | 2.7 | 2.25 | 50 | 60 | 4/21/90 |
| 560 | 3.0 | 2.5 | 50 | 44 | 4/21/120 |
| 560 | 3.0 | 2.5 | 50 | 60 | 4/21/120 |
